Inside Our Christmas Production: Four Metal Accessory Orders, 61,000 Pieces
With a little over a month to go before Christmas, most of the seasonal metal accessory orders we accepted for holiday launches have completed production, been packed, and shipped. With our customers’ permission, we’re sharing four examples from this year’s Christmas production.
The Christmas rush is never about just one product. In the weeks leading up to the holiday season, we（ButtonArea） may be working on wearable accessories, fragrance packaging components, and small decorative charms at the same time. Each item has its own design, production route, finishing requirements, and inspection points.
Across the four projects below, the total quantity comes to 61,000 pieces.
Four Christmas Projects at a Glance
Product | Quantity | Production note |
Vintage Christmas Tree Pin Brooch | 5000 pcs | Zinc alloy body with stainless steel butterfly clutch |
Vintage Christmas Bell Brooch | 5,000 pcs | 3,000 gold-tone + 2,000 silver / nickel-tone |
Custom Zamac Perfume Cap – Christmas Tree | 1,000 pcs | A seasonal Zamac cap for fragrance packaging |
Custom Christmas Star Metal Charm | 50,000 pcs | High-volume custom metal star charm |
1. 5,000 Vintage Christmas Tree Pin Brooches
We produced 5,000 pieces of the Vintage Christmas Tree Pin Brooch. The design uses a familiar Christmas tree silhouette, with a star at the top, raised garland lines, layered branches, and textured recessed areas. The body is made from zinc alloy, and the back uses a stainless steel butterfly clutch so the brooch can be attached to coats, jackets, sweaters, scarves, and other winter pieces.
For the finish, we used a soft matte champagne gold referenced to PANTONE 10400 U. We like this tone for Christmas accessories because it feels warm and festive without the strong shine of bright yellow gold. It also pairs naturally with dark green, burgundy, cream, camel, and other winter colours.
Product page: Vintage Christmas Tree Pin Brooch
2. 5,000 Vintage Christmas Bell Brooches in Two Finishes
The second order was for 5,000 Vintage Christmas Bell Brooches: 3,000 in gold and 2,000 in a silver / nickel-tone finish. The design brings together several classic Christmas details – a bell shape, holly leaves and berries at the top, raised snowflake motifs, a textured bell surface, and two small bells at the bottom. Like the tree brooch, it uses a zinc alloy body with a stainless steel butterfly clutch.
The champagne-gold version uses PANTONE 10400 U as its colour reference. For the cooler nickel-tone version, PANTONE 877 C is a reference only; the final production colour should be checked against the approved physical sample. Offering both finishes gives a collection two different moods: warm and traditional on one side, cooler and brighter on the other.
Product page: Vintage Christmas Bell Brooch
3. 1,000 Custom Zamac Perfume Caps with a Christmas Tree Theme
Christmas details are not limited to clothing and gift accessories. We also completed an order for 1,000 Custom Zamac Perfume Caps with a Christmas tree theme. This project brings the seasonal idea into fragrance packaging, where the cap becomes one of the first details people notice when they pick up a bottle.
A metal perfume cap has to do more than carry a decorative motif. It also needs to work with the bottle and its neck assembly, so dimensions, fit, weight, surface finish, and the approved sample all matter during development.
Product page: Custom Zamac Perfume Cap – Christmas Tree
4. 50,000 Custom Christmas Star Metal Charms
The largest quantity in this showcase was the Custom Christmas Star Metal Charm, with 50,000 pieces produced. A star is a simple, instantly recognisable Christmas symbol, but a high-volume order still calls for careful control. At this quantity, the goal is not just to complete the run; it is to keep the agreed shape, surface appearance, and overall finish consistent throughout production.
Product page: Custom Christmas Star Metal Charm
What These Four Orders Say About Our Production Capability
These four orders cover different product categories and very different quantities: two wearable brooch designs, a fragrance packaging component, and a large run of metal charms. Together, they show the range of seasonal metal accessories we can coordinate for customers who are preparing a Christmas launch.
We do not treat every product as if it follows exactly the same route. A brooch needs attention to its decorative relief and pin assembly. A perfume cap needs to be reviewed against the bottle it will fit. A large charm order needs a clear production standard so the same appearance can be maintained across a much bigger quantity.
Our general approach is to confirm the artwork and application first, review the material and manufacturing route, prepare samples where required, and move into bulk production after the customer approves the sample. During production, our team checks the points that matter to each item – such as shape and relief, surface finish and colour, assembly, fit, edges, and packaging. Finished goods go through final inspection before we pack and ship them.
Why We Start Christmas Projects Early
Christmas has a fixed date, and seasonal products need to reach the market before shoppers start making their holiday purchases. If you are planning a new collection for next Christmas, we recommend getting in touch early. More development time gives us room to discuss the design, check whether it can be made as intended, review finishes, prepare samples, make adjustments, and confirm packaging and delivery arrangements.
Fast seasonal projects are possible, but a rushed schedule can leave less room for changes and may add pressure to tooling, finishing, or shipping. A clear design brief and an early sample review usually make the whole project easier to manage.
Get Your Next Seasonal Project Moving
If you are planning a Christmas collection, a holiday gift program, or a custom metal accessory for fragrance packaging, send us your artwork, reference images, target quantity, finish preference, and delivery date. We will review the details with you and get back to you within 24 hours.
Email: sales012@wysecn.com
Website: https://buttonarea.com
WhatsApp: +86 13688844607
FAQ
Frequently Asked Questions About
Need project advice?
Add Your Heading TeOur team can review your drawing and recommend the right mold-making approach for your metal accessory project.xt Here
Drawing review
Structure optimization
Mass-production support
01. What types of custom Christmas metal accessories can you manufacture?
We manufacture a range of custom Christmas metal accessories, including Christmas tree brooches, bell brooches, decorative metal charms, and Zamac perfume caps. We can work with different designs, materials, finishes, and attachment methods to support seasonal collections and holiday packaging projects.
02. Can you handle large-volume Christmas accessory orders while maintaining consistent quality?
Yes. We support both small custom orders and large-volume production. In our recent Christmas production showcase, we completed four projects totaling 61,000 pieces, including 50,000 custom metal star charms. We confirm production samples before bulk manufacturing and inspect key details such as shape, surface finish, plating color, assembly, and overall consistency throughout production.
03. When should I place an order for custom Christmas metal accessories?
We recommend starting your Christmas accessory project early to allow enough time for design review, tooling development, sampling, finish confirmation, bulk production, and shipping. To help us evaluate your project, please send your artwork or reference images, target quantity, preferred finish, and expected delivery date. This gives our team a clearer picture of your requirements and production schedule.
